Electromagnetic Energy Can Affect Your Health

by | dirty electricity, electric fields, electromagnetic energy, electromagnetic radiation, EME, EMF, EMR, environmental sensitivities, environmental stressors, grinding teeth, magnetic fields, radiofrequencies, sleep, smart meters, wireless technology

Electromagnetic energy (EME), also known as electromagnetic fields (EMF), emanates from wired sources and radiates from wireless devices.

It is a very ubiquitous environmental stressor that very few homes are free from.

From the hundreds of assessments of homes and workplaces that I’ve conducted over the last decade, I’ve seen again and again similar symptoms in people who are exposed to high levels of radiofrequency (RF) EME.

These symptoms include:

  • Disturbed sleep, with an inability to fall into a deep restful sleep
  • Busy dreams
  • Waking unrefreshed
  • Non-stop thoughts, I had a 6 year old once tell me that it felt like she couldn’t turn her brain off
  • A sense of buzzing similar to feeling caffeinated
  • Agitation and stress
  • Anger and sometimes rages
  • Feeling frustrated and irritable
  • Difficulty concentrating
  • Grinding teeth (bruxism)
  • Ringing in the ears (tinnitus)

And what I wanted to share with you today is based on the occupants experiencing many of these symptoms in their new home.

More importantly, the reason for sharing is because the source was so surprising.

Surprising Sources

I recently conducted an assessment for my clients in the home that they were just moving into.

Being out of the city, I was expecting lower readings than what I see particularly in inner city homes.

However, apart from one source, the levels of the different types of electromagnetic energy (EME) were incredibly low – and very close to natural levels.

ELF AC electric fields, we aim for below 0.3 V/m. This place was around 0.1 V/m.

ELF AC magnetic fields 2, we aim for below 2.0 mG.  This place was close to 0.0 mG throughout.

RF EME, we aim for below 10 µW/m2. This place was below 2 µW/m2. This place almost everywhere was below 2 µW/m2… but there were levels well over 100 µW/m2 in the bedroom.

High Frequency Transient Spikes (aka “Dirty Electricity”) we’re aiming for below 100 mV. This place sat between 20-40 mV.

So it intrigued me as to the source of the sleep issues they were experiencing from the very first night they spent there. 

Outside their bedroom was the meter box and switchboard. The meter was a smart meter, so no surprises there… but the readings I got, and the pattern of spikes did not match what I’d expect from a smart meter.

Lo and behold, in the meter box was also something else!

It looked almost like a white computer mouse and was attached to the front of the meter and was sitting on the metal wall of the meter box.

It was an energy management system. 

This is what it looks like:

electromagnetic-energy-energy-management-system-Eco-Health-Solutions

They are designed to send information to an app on your phone so you can manage your energy usage.

Have you got one?

Electromagnetic Energy Findings from the Energy Management System

In this video, you can see the lovely low background levels.

The readings I got were really interesting. I recorded them for you to see and hear.

Every few seconds, you’ll hear a sound that is a bit like a metronome or clock ticking, that is the sound coming through the meter of the EME that it is detecting.

In these videos, you can see how high the readings were…

And it isn't even connected to anything!

What is Happening?

Whilst taking the readings, as you can see, the energy management system is not connected to anything.

When it was installed in the meter box, it was stuck on with double-sided sticky tape.

And that is normal – they are simply stuck on the meter.

They are then meant to be connected to an app on your smartphone via Bluetooth connectivity.

Whether or not a phone is connected to it, as you can see, it is continuously emitting RF EME every few seconds.

What Can You Do?

Check your meter box and remove the energy management system installed, if you've got one.

It may not look exactly the same as the one I’ve shown you here, so be sure to check carefully. 

If you’re in any doubt about what it is, take a photo of it and ask your electricity supplier.You can share it in our Facebook group.

If you're interested in finding out more about shielding your smart meter, check out this guide here.

What Was the End Result?

With the energy management system gone, I reassessed and found that every 5-10 minutes, there was a spike in RF readings. This was coming from the smart meter.

We installed shielding (shielding paint) and I measured the levels again – and the levels dropped down to what the rest of the place was – incredibly low levels around 2 µW/m2.

And, I’m happy to report that my clients are now sleeping well.

EMF 5 little known sources cover © Eco Health Solutions

Are you already familiar with EMF/EME? 

I've put together this Healthy Home Guide which focuses on the little known sources of EMF/EME.

You can download it for FREE here.

Smart Meters – What Can Be Done?

by | building biology, dirty electricity, earthing, ehs, electric fields, electromagnetic radiation, EMF, EMR, environmental sensitivities, high frequencies, indoor environmental health, magnetic fields, radiofrequencies, smart meters, wireless technology

Smart meters have been rolled out in many parts of the country, have you got one?

Given I am so immersed in this kind of technology, I am always surprised when someone hasn’t even heard of them. 🙂

So, let's start with what they are.

What are Smart Meters?

A smart meter is a relatively new type of electricity meter.

We all had analog ones. These new ones are digital, and the majority of them transmit information back to the power companies.

Please note, that not all of them do.

The move to smart meters in Australia has at least several reasons that I can figure out:

  • They don't need to be manually read, as the data can be transmitted – saving the power companies money;
  • It was decided that they would be rolled out in Victoria after the terrible fires we had some years back that were caused by power lines coming down. If smart meters were installed, they could shut down the power and it is hoped that this would then prevent this from happening again; and
  • As part of the bigger picture of the Internet of Things (#IoT) and #5G, they can talk to devices and turn them on and off…

What is So Different About a Smart Meter?

In a nutshell, smart meters transmit information wireless (thus utilising radiofrequency EMF).

This is both the benefit AND the issue.

What is Wrong with Smart Meters?
Aren't they Smarter?

No, they are not. When they first came out and sensitive people began experiencing symptoms, many of us were calling them “Dumb Meters!”

Smart Meters emit four different types of electromagnetic fields (EMF).

  1. Radiofrequency EMF – as already mentioned, this is the wireless technology. This can pass through walls and travels quite long distances.
  2. “Dirty Electricity” (High Frequency Transient Spikes) – due to the fact they contain an inverter. This type of EMF is on the wiring, but can emanate into a room through the walls.
  3. Magnetic Fields – from the wiring. This also passes through walls, but levels drop off very quickly with distance.
  4. Electric Fields – from the wiring. Although this type of EMF can pass through walls, it is seeking the fastest route to earth. So, it may easily bend to reach earth if a good conductor is nearby. (Think of lightning hitting the tallest tree.)

eco-health-solutions-home

Any issue with that?

All of these types of EMF are at far higher levels than what we are looking for from a health perspective.

When ours was first installed, the power company offered to send me their literature to allay my concerns. Having waded through the 100-ish pages, I found that smart meters emit magnetic fields at 17 mG. From a health-perspective, we are looking at 2 mG for daytime exposure and 0.2 mG for bedrooms.

The power companies claim that they only transmit wirelessly up to six times a day. Whilst it may be true that the information is only received up to six times a day, they are emitting 24/7 and spike (rapidly reach a much higher level) frequently.

Instead of helping, my concerns were heightened!

Early in my career as an Indoor Environmental Health Consultant it became very clear that the levels emitted, and the fact that EMF is being emitted 24/7 (and we can't turn it off), many people I encountered had reached their tipping point. This has resulted in* these people to develop a heightened sensitivity to EMF, with symptoms varying from insomnia, muscle tension, vivid dreaming, grinding their teeth (bruxism), ringing in the ears (tinnitus) and so on.

*These symptoms are anecdotal – I have accumulated this list from what has been reported to my by clients.

My stance is that it is never one thing that causes heightened sensitivities, but it can easily be one thing that “breaks the camels back.” That said, it is vital that we reduce all environmental stressors, particularly for when we are asleep.

What Can Be Done?

  1. Not get one – if you have the chance to not have one installed, please avoid doing so.
  2. Have it removed – in some areas, people have been able to have them removed. Occasionally, they have to pay more per year someone manually needs to read them. (Worth it, I think!)
  3. Have the chip removed so it can't emit wirelessly – this will solve the issues of one of the four types of EMF.
  4. Move the aerial – if you contact your energy provider, they may be able to put the aerial on the roof.
  5. Have your power company “power it down” – smart meters can function quite well at around 5% (or less in some cases) capacity… and they are installed and set at 100%. Note, that not all smart meters can be turned down.
  6. Shielding – done with care can be a simple and effective solution. In most cases, it should be able to be done for less than $300.

What If I Am Renting?

No problem, shielding can be effectively installed in such a way that you can take it with you.

Can't We Just Buy a Cage or Wrap Smart Meters in Aluminium?

NO!

Both of these options can result in the meter working harder to get the signal out. This results in much more “force” being required to get the signal out, causing it to emit at higher levels.

So How Can I Shield it Properly?

I get asked that a LOT… so I have made this easy-to-follow guide packed with expert tips for homeowners AND renters.

”YES!

#smartmeters #EMF #radiofrequency #electricfields #magneticfields #dirtyelecticity #shielding

Is My House Making Me Sick? Pt2

by | air fresheners, detoxification, fragrances, high frequencies, indoor environmental health, mobile phone, perfumes, personal care, personal care products, radiofrequencies, scents, self-care, sleep, VOCs, water damage

Is My House Making Me Sick?

PART 2

>> Is My House Making Me Sick? Part 1 is here <<

3. Sleep… in peace!

There is a lot of emerging research that shows device use interferes with our sleep, and that blue light can damage our eyes.

The mental stimulation when Googling things, interacting on social media, and even video calls can make it hard to sleep.

Our tablets, smart phones and smart watches contain LED lights.

The evening use of such devices which has been associated with:

  • Poor quality sleep,
  • Reduced concentration the next day,
  • Poor mood, and
  • Reduced accuracy…

… According to recent research.

As well, there is a reduction in melatonin – a hormone that has antioxidant actions.

Antioxidants play an important role in detoxification and keeping us healthy.

When we began this conversation, I shared with you about the importance of sleep in the healing. Anything that interrupts sleep, for whatever reason, needs to be reduced.

Send this to my inbox

Did You Know?

Did you know that apps used to measure sleep have uncovered an insomnia epidemic?

BUT did you also know that the wireless technology required for these apps to function has been linked to sleep disturbances?

“What Can I Do?”

At the very least, don’t sleep with your phone!

4. Smell… naturally lovely!

I want to tackle the topic of “fragrances” here. Fragrances are in everything from perfumes, air fresheners and deodorisers. They are in our laundry products, sanitary protection, and even in our cosmetics. Nappies, doggy-do bags, and toilet paper also are scented… and that is just the tip of the iceberg!

If you ever see this word on a label, it means “a cocktail of many ingredients.” Fragrance, parfum and perfume all mean the same thing, when reading labels.

The ingredients used in perfumery are primarily chemicals, most of which haven’t been tested for safe use by humans, some that have been tested really aren’t good for us (causing cancer, irritating our skin and lungs, messing with our hormones…).

Our exposure to fragrances is enormous and our bodies need to deal with this. For some people, this constant exposure is physically exhausting.

Did You Know?

Did you know essential oils are a better option that synthetic fragrances? But please bear on mind that they are very potent – so use sparingly and avoid using them 24/7. For people who are environmentally sensitive, even these can be problematic. Please use them with care (and NEVER eat/drink them).

“What Can I Do?”

Don’t buy anything that contains fragrance, parfum or perfume.

Send me a copy, please!

5. Stay… mould-free!

Have you noticed there has been a lot of media stories about mould and how it is making people sick? It has definitely attracted a lot of attention, and was the subject of a 2018 Parliamentary Inquiry, instigated by Senator Lucy Wicks. Mould comes in many different colours, and it doesn’t have to be black to cause health problems.

Mould spores are everywhere and play an important role on our planet. Only 25% of the spores can grow, the other 75% are “dead” (that said, it doesn’t make them less problematic for someone who is sensitive).

However, we don’t want mould growing in our homes.

When you think about it, all mould is waiting for is the right conditions to grow. This centres on the right amount of moisture. Moisture can come from leaks, burst pipes, spills, condensation and many other places.

Did You Know?

Did you know that flexible braided hoses (the bendy pipes on your taps and toilets) account for over 20% of water damage claims in Australian homes? They only last for around 5-7 years and erode faster in the presence of chemicals. (What is under your sink?)

“What Can I Do?”

Deal with water quickly – mop up spills, fix leaks, dry out anything that has become wet within 24-hours.

I trust this has given you a lot to go on with…

If you have any concerns, or want to get in touch, please book a call.

Lucinda, can you call me?

Wi-Fi Free Tips to Avoid Wireless Technology

by | EMF, EMR, high frequencies, indoor environmental health, radiofrequencies, wifi, wireless technology

“We’re Wifi-Free At Night,” they said…

Recently I assessed a home where the parents very proudly told me that each and every night, they are wifi-free. What they did was to log into their router and turn off the wifi on their router *every* night. They did this every night without fail.

What an awesome effort!! That really does take commitment to do this on a daily basis.

(By the way, this IS something YOU can do if you still have a wifi router… but I prefer you don’t have one.)

It turns out that the teenagers use the wifi all night.

HOW?

Because there were powerline adapters in the house that utilised wireless technology.

So, despite turning off the wifi emitted by the router, the house was still bathed in radio frequency electromagnetic energy (RF EME), including the bedrooms.

Powerline Adapters Help with Wifi-Free

I love powerline adapters – as they mean in many buildings that the internet can be used throughout the house without having data points installed. You can finally be wifi-free!

(Note that they do add dirty electricity, so having data points installed throughout is by far the best option.)

If you want to get powerline adapters, or routers, or anything similar, then you have to be careful NOT to get ones that work wirelessly.

TIP TO OUTWIT

You can check all the specifications, but I also highly recommend contacting the manufacturer and ask,

“Can I use this wirelessly?”

You read that right! I want you to ask the OPPOSITE of what we are seeking. This is because almost everything can be used via ethernet or cables.

When they get back to you with, “I am so sorry, this cannot be used wirelessly,” you know you are on a winner.

#EMF #powerlineadapters #wififree #datapoints

EMF Exposure – Understanding How You Can Reduce Your Exposure

by | building biology, buildings and health, dirty electricity, electric fields, EMF, high frequencies, indoor environmental health, magnetic fields, radiofrequencies

EMF Exposure – Understanding How You Can Reduce Your Exposure

EMF is a sneaky thing – because you can’t see or smell it, it is often not considered.

When people are exposed to EMF, they can get a variety of symptoms. With regards to radio frequency electromagnetic energy (RF EME), the officials that set the exposure standards only recognise “thermal effects” – so set the standards to below the level at which tissues are heated.

EMF Exposure Standards Are Too High

I firmly believe that there are many health/biological effects that occur well before this level. I believe that the exposure standards are way too high, especially when IARC (the International Agency for Research on Cancer) recognise radio frequency EME & ELF AC magnetic fields as “Category 2B” (this means that they recognise that these types of EMF are possibly carcinogenic to humans).

There is a growing body of research from scientists (including retired ones!) that not only shows that certain types of EMF result in the body reacting in a certain way, but also are becoming more able to explain how and why these reactions occur.

Symptoms from EMF Exposure

Common symptoms from EMF exposure, based on my observation and interaction with hundreds of clients over the years:

  • headaches and migraines (especially unexplained)
  • poor sleep, including vivid dreaming
  • waking feeling unrefreshed
  • low energy
  • pain, including sciatica
  • grinding teeth (bruxism)
  • ringing in the ears (tinnitus)
  • poor concentration

Reducing your EMF exposure is important – not through gadgets and stickers, but through turning things off, switching to safer options, and making choices about when and how you use technology.

This is one of my favourite areas to work with people on. Why? Because often, simple changes to behaviour can significantly reduce your exposure.

At Eco Health Solutions, my team and I assess radio frequency electromagnetic energy (RF EME), ELF AC magnetic fields, ELF AC electric fields and dirty electricity.

EMF Exposure in the Home

Here are the top 5 sources of EMF that my team and I commonly see in homes:

1 The meter (smart or otherwise) and the fuse box on the bedroom wall

2 Power boards under the bed

3 Mobile phones and devices (sometimes even found under pillows!)

4 Cordless phones

5 Wi-fi

Reducing your exposure is important – and since our homes are our castles, they are also our safe havens.

Workplaces can expose staff members to extremely high levels of EMF – without realising it!

 

EMF Exposure in the Workplace

 

Here are the top 5 sources of EMF that my team and I commonly see in workplace:

 

1 Cordless headsets

2 Wi-fi

3 Mobile phones and devices

4 The “IT hub”

5 A “spaghetti” pile power cords under the desk

 

Given most people spend a good 8 hours at work, it is important to reduce your personal exposure as much as possible.

How to Connect to the Ethernet – Computer, Phone and Tablet

by | building biology, buildings and health, electromagnetic radiation, EMF, indoor environmental health, mobile phone, radiofrequencies

Connecting to the Ethernet has many benefits, no matter who you are or what your reason is.

  • If you are looking for a safer way to use the internet than wifi – this if for you.
  • If you want to have a good connection for video calls or games – this is for you.
  • If you want to stream movies, etc more smoothly – this is for you.

How To Connect to the Ethernet – Simply, Cheaply and For Your Health

Here are the simple step-by-step instructions to connect to the Ethernet.

I am going to assume zero knowledge and explain things as simply as possible. Let’s start with some definitions.

Definitions

What is “Ethernet”?

Simply put, the Ethernet is your cabled internet connection.

It is the same as LAN (local area network). 

ethernet

The connection is an RJ-45 – seen here. (Please bear in mind that the cable and plug is often blue or yellow, but may be different colours. Do look at the plug part of it – this is the important bit.)

To the right here, is an image of an Ethernet cable with a close up of the plug.

EMF Basics

EMF

EMF is the abbreviation for electromagnetic fields. There are many different types of EMF.

Wireless

Wireless technology depends on radio frequency electromagnetic energy (RF EME). We do sometimes use more complicated terms. But everything wireless is either HF or RF.

Wired

Wired technology can create a variety of different types of EMF.

If it is wiring or appliances connected to the mains it is “ELF AC” EMF. This is extremely low frequency alternating current EMF. This is man-made. Because it goes back and forth (thus “alternating”) it creates magnetic fields and electric fields that are often high, and problematic for many people.

If it is something that runs on battery, it is not alternating, and generally the fields are lower.

ethernet adapter

Something You May Need – Your “Charging Cable”

 

ethernet adapter

To simplify this post, I wanted to explain what I mean here by a “charging cable.”

All devices and phones come with a cable to charge them when the battery gets low. Most of them are made up of a cable that is inserted into a plug that you put into a powerpoint.

When you separate them out, you will have two parts – the plug and the charging cable. The charging cable will have a USB plug on the end.

usb connector

Goal

The goal is to reduce exposure to wireless EMF and also the AC EMF.

As such, we are looking to work from batteries, and reduce exposure to other EMF to levels as low as possible.

Another good reason is to have a steady connection which aids smooth streaming.

EXPERT TIPS

  1. Once you are connected, please make sure you turn off Bluetooth, 3G/4G/5G  and wifi.
  2. Your phone, tablet or device will be connected to the internet and can be used in FLIGHT MODE. This is recommended.
  3. Be aware that when your phone is in FLIGHT MODE you cannot make or receive calls. You can send and receive text messages.

Here’s How to Use the Internet via Ethernet

Modem or Router

Firstly, your modem/router needs to be one that doesn’t emit HF/RF. Depending on where you are and if you are connected to the NBN yet or not, the type of modem will vary.

Generally, you can get a modem/router that cannot be used wirelessly from online stores.

When looking to purchase one, you need to ask a key question – which is actually the opposite of what you want.

Can I use this wirelessly?

By asking this, you find out if it emits HF/RF. If the answer is, “No” – then this is GREAT. If the answer is “Yes” – you need to keep looking.

(The reason to ask this way around is that any modem/router can be used via cable/ethernet – so you won’t find out if it emits HF/RF EMF.)

Computer

Simply plug your ethernet cable into your modem/router and into the socket (plug hole) on your computer.

** be sure to turn off wifi, bluetooth, etc on your computer as well

(The reason to switch these off is that even if you are not using them, if they are on, they are searching for a signal.)

Tablets, Phones and Other Devices

This is a tiny bit more complex, but very very easy.

You need to determine if you have an Apple product or an Android product. Once you have that figured out, you can follow these simple steps.

Apple (iOS)

The more recent Apple phones and tablets have a “lightning” connection. I will walk you through both options – so let’s do one at a time.

Lightning to Ethernet

This is quite a small plug and on your device, it will look like this:

lightning_connector

This is where it plugs into:

iphone

You will need three parts so that you can connect these to the internet via ethernet.

  1. A Lightning Ethernet Connector for Devices

STEP 1 What you do is plug your Ethernet Connector for Devices into your device/phone/tablet.

ethernet-adapter

The Ethernet Connector for Devices is plugged into your device.

STEP 2 Plug the ethernet cable into your Ethernet Connector for Devices.

ethernet adapter

Plug your ethernet cable into the Ethernet Connector for Devices.

Ultimately, you and up with a connection that looks a bit like this…

lightning connector 1

Schematically this connection is:

modem/router ->Ethernet Connector for Devices -> Device/Phone/Tablet

Non-Lightning Connections

In this instance, you will follow the instructions for the Androids – below.

Androids (and Non-Lightning Connections)

Note: not all Androids support Ethernet use.

** check with the manufacturer before purchasing equipment **

You will need three parts so that you can connect these to the internet via ethernet.

  1. Your charging cable
  2. A female to female USB adaptor like this one
  3. An internet adaptor like this one

STEP 1 What you do is plug your charging cable into your device/phone/tablet.

lightning connector

Charging Cable Attaches to your device

STEP 2 Then, attach the female to female USB adaptor on the end.

a female to a female usb adaptor

Charging Cable attaches to female to female USB adaptor

STEP 3 Next you will plug the internet adapter into the female to female USB adaptor.

ethernet converter

Attach the Ethernet Adaptor to the female to female USB adaptor

STEP 4 Finally, you will plug your ethernet cable into the end of the internet adaptor.

ethernet connection

Plug your Ethernet cable into the Ethernet Adaptor

Schematically this connection is:

modem/router -> Ethernet Adaptor -> female to female USB Adaptor -> Charging Cable -> Device/Phone/Tablet

I hope you find this really helpful and easy to follow.

Here’s to the safer and smoother use of technology!  🙂

Sleep: Why Is it So Important?

by | affirmations, detoxification, dust mites, electromagnetic radiation, EMF, health, high frequencies, indoor air quality, indoor environmental health, mould, radiofrequencies, sleep, stress

Do you struggle to get a good night’s sleep?

Many people do these days, and this can have a bigger impact that just feeling sleepy all day, or perhaps being on the caffeine-cycle. Ironically, according to apps on our devices, there is an “insomnia epidemic.”

When you are tired, you don’t function so well – your mood is off, your tolerance levels are down, you are easily agitated or stressed. As well, over time, this can deplete you and your immunity is also affected.

Why is Sleep so Important?

Sleep is incredibly important as it is the time that we heal and recover from our day – in preparation for the next day. Sleep is when we detoxify, when we create melatonin (a hormone which has an antioxidant effect) and when we rest.

It is one of the most important physiological functions we do, in my opinion.

What Affects Sleep?

There are many factors that can impact sleep. Some of these are:

  • Stress
  • Eating too late
  • Caffeine
  • Conversation
  • Poor sleep hygiene
  • Environmental stressors

eco-health-solutions natural

 

Did You Know…?

Did you know that if you use your device for two hours in the evening that it affects the quality of your sleep; melatonin production; your mood, attention and accuracy the following day?

Research links this to the short-wave light emitted from the LED lights inside our devices (Green, et al, 2017). I wonder if there is more to it, and the use of these devices on wi-fi or 3G/4G/5G is also playing a role.

What Can I Do to Improve My Sleep?

I am going to focus purely on environmental stressors here…

1) Promote melatonin production – ensure your bedroom is dark. If this isn’t possible, it would be worth using an eye shade. 

2) Reduce the radio frequency electromagnetic energy (RF EME) – turn off your mobile phone and wi-fi router

3) Reduce indoor air contaminants – remove scented reeds and candles from your bedroom

4) Minimise exposure to allergens – use a silk pillowcase to reduce issues with house dust mites (HDM)

5) Reduce your exposure to biotoxins – address any mould in your home

Still Concerned?

Then contact me and we can arrange a
Virtual Indoor Environmental Health Assessment
to assess and address stressors in your environment.

 

References

Green, A, Cohen-Zion, M, Haim, A & Dagan, Y (2017) Evening Light Exposure to Computer Screens Disrupts Human Sleep, Biological Rhythms and Attention Abilities Chronobiology International (Online) Available at https://doi.org/10.1080/07420528.2017.1324878 (May 2017) 

#sleep #indoorenvironmentalhealth #environmentalstressors

 

Sick Building Syndrome: Is Your Workplace Healthy?

by | air pollution, building biology, buildings and health, chemically sensitive, chemicals, cleaning products, drinking water, ehs, electromagnetic radiation, EMF, environmental sensitivities, health, high frequencies, humidity, indoor air quality, indoor environmental health, mobile phone, mold, mould, perfumes, personal care, radiofrequencies, VOCs, water damage

“Sick Building Syndrome” is a term that has been around for a few decades to explain how and why people are affected by their buildings. As a building biologist, I am frequently assessing the health of buildings (whether they are sick or not) and how they may impact upon the health of the occupants – be that at home or at work.

Guest author Jennifer Bennett discusses sick building syndrome in relation to the workplace.

Sick Building Syndrome: Is Your Workplace Healthy?

Does it sometimes seem like everyone in your office is coming down with something?

Are you and your colleagues constantly coughing and sniffling, or complaining of headaches, dizziness and nausea?

Or perhaps you’re just really tired all the time?

And yet, when 5 o’clock rolls around and you’re on your way home, you start to feel a lot better.

You might be thinking that you just hate being at work!

Could it be more..?

However, there may be something other than burnout or a bad bout of the flu to blame.

If you’re experiencing odd symptoms that disappear when you go home, your building may well have a case of Sick Building Syndrome.

This is a somewhat mysterious condition that causes general feelings of ill health in occupants of a building, including headaches, aches and pains, skin irritation, fatigue and shortness of breath.

The precise causes of Sick Building Syndrome haven’t been identified, but the general consensus is that it’s a symptom of environmental problems within a building.

People first started reporting Sick Building Syndrome in the 1970s, when economic pressures and oil embargoes forced architects and engineers to design more airtight office buildings to cut energy costs.

As a direct result, indoor air quality drastically worsened, as polluted air became trapped in buildings rather than being recirculated outside.

Chemical pollutants such as VOCs and biological contaminants such as mould then gradually rose in concentration, resulting in the health problems in employees that we now call Sick Building Syndrome.

Poorly designed ventilation systems also resulted in uncomfortable temperatures and high humidity levels, which can further encourage mould growth.

What is the Impact?

A poor working environment doesn’t just have health implications – it can also have a profound economic impact on businesses.

Sick Building Syndrome drastically reduces productivity, with poor indoor air quality estimated to cost employers around $15 billion a year in worker inefficiency and sick leave.

It’s also been noticed that Sick Building Syndrome is most common in open plan offices, and it’s unlikely to be a coincidence that employees in open plan offices also take on average 62% more sick days than those in cellular offices.

It’s clear that something needs to be done.

This infographic…

Paint Inspection have designed this infographic to tell you everything you need to know about this important topic.

Covering everything from the symptoms and causes, to the costs to businesses and some actionable solutions, we’re sure you’ll leave this blog feeling more equipped to deal with your unhealthy office building!

About the Author

Jennifer Bennett is the Content Writer at Paint Inspection, a UK-based coating inspection and surveying company.

Want to learn more about how you can create a healthier workplace?
Book a call so we can create a plan for you. >>

”Want