Top

Health Practitioner’s Role in Mould and Health

Role of the Health Practitioner in Mould and Health

With the growing awareness of the impact that mould has on our health, there is quite a lot of activity in many areas of the community. As someone who works in this field, it is exciting to see the burgeoning interest of the health practitioner (medical through to alternative health) and that they are getting on board to support people in reclaiming their health. However, it is also somewhat frustrating.

Why?

Because health practitioners are knowledgeable in their modality of understanding the health of the body and what to do to support it.

Where it gets frustrating is when health practitioners try to operate outside their scope and claim some mastery of understanding mould and the building, and then what to do.

As both a health practitioner AND a building biologist, I straddle both camps and deeply understand and appreciate the different perspectives.

The Problem is This…

Usually someone who is sensitive or sensitised to mould has done the rounds of health practitioners (medical to alternative) and has spent a good sum of money on tests. Many of these people are struggling to retain an income due to the health issues they face.

When health practitioners recommend testing that does not further the rectification of the issue, what happens is that more money is spent and often a wrong conclusion is achieved.

ERMI – its Role and its Limitations

ERMI (environmental relative mouldiness index) is a test that was developed as a quantitative indicator in settled residential dust of the presence and predominance of mould species associated with indoor fungal growth on building materials. The test was developed to use in scientific research, has been successfully used for this purpose, but is not optimised or recommended for use in individual houses.

The test provides a number associated with the “mouldiness” of a building, ranging from -10 to +20, permitting comparison with a database of 1,083 randomly selected US homes.  Of the tested US homes, 25% exhibited an ERMI score of -4 or less, and 25% exhibited a score of +5 or more.  A home measuring 0 on the ERMI scale would fall in the middle at the 50th percentile “mouldiness,” with half of all homes tested having values below that number and the other half having values above.  A 90th percentile home would therefore be considered very mouldy compared with the average home, and a 10th percentile home, minimally mouldy.

The ERMI metric looks at 26 species of mould more common in water damaged homes, and 10 species of mould commonly found in US buildings without water damage. The use of the ERMI metric has been validated in the US and several other countries, but not in Australia. This is important due the difference in building materials and design, construction techniques, climate and so forth – as these factors can all influence the ERMI results.

People have an expectation that an ERMI test will  be similar to a pregnancy test with a 99% likelihood of telling you are pregnant when you really are, and 99% likelihood of telling you that you aren’t pregnant when you really aren’t, in other words, that there will be very few false positives and very few false negatives. In Australia, we do not have any data with which to judge how accurate these results are and many homes that are tested may be returning false negatives and false positives.

The ERMI test was originally done by vacuuming a large surface area of dust composited from the bedroom and living room floors, but now the methodology relies on the use of a swiffer cloth. This approach hasn’t been validated. Further, laypeople collecting samples themselves tend not to use the standardised methodology either, and can introduce positive and negative biases in the readings as a result, increasing false positives and false negatives.

Other types of mould samples (surface and air) identify hyphae and spores, fruiting bodies, and so forth, which potentially provides a clue about nearby fungal growth. ERMI is looking at the total mass of genetic components, and this detail is absent, and therefore the clues are missed.

The ERMI metric has a +/- 3 factor (standard deviation) as described by Vesper (2009). So given a final result of 3, the result is really somewhere between 0-6.

Mould is the most visible part of excess indoor dampness. There is a myriad of other components in the microbial stew initiated by excess indoor dampness, including increased exposures to multiple allergens such as dust mites, cockroaches, and rodents. ERMI is only looking at mould.

ERMI doesn’t provide information that helps to pinpoint the cause or location of the moisture problem.

ERMI doesn’t help with full identification and development of a remediation plan –  a skilled assessor (building biologist or occupational hygienist) needs to step in and:

  1. Conduct a thorough assessment to locate the problem and the cause
  2. Address the cause – a mould issue is a moisture issue, after all
  3. Do another set of testing that is accurate and useful

So, What Should a Health Practitioner Do?

First and foremost – recognising that there may be a problem with mould and referring onto the appropriate professionals.

For that, I have created a simple checklist for you to use.

Referral for Mould Assessment Tool

It is free.

It is easy to use.

It is quick to use. 

Download your copy from here: www.ecohealthsolutions.com.au/mat

What Else?

There are loads of ways that a health practitioner can support their client/patient.

I have offered a lot of really useful and practical ways that you can help your clients/patients in this webinar that I created for Hawthorn University.

You can watch it right here.

  • Understand mould and the important role it plays in our environment;
  • Become familiar with water damaged buildings and how they can impact health;
  • Become clear on your role as a health practitioner;
  • Introduction to a tool to assist in supporting clients to achieve greater wellbeing.

References

Tang, W (2007) Petition to EPA

US EPA Office of Inspector General (2013) “Public May be Making Indoor Mold Cleanup Decisions Based on EPA Tool Developed Only for Research Applications” in Report No. 13-P-0356 (22 August 2013): 1-13

Vesper, S (Feb 2009) “Understanding ERMI: How to Get the Most Value from the ERMI Scale” The Synergist (February, 2009): 40-43

Vesper, S, McKinstry, C, Haugland, RA, Iossifova, Y, Lemasters, G, Levin, L, Khurana Hershey, GK, Villareal, M, Bernstein, DI, Lockey, J & Reponen, T (Jan 2007) “Relative Moldiness Index as Predictor of Childhood Respiratory Illness” J Expo Sco Environ Epidemiol. (January 2007); 17(1): 88-94


#mouldhealth #ERMI #betterthanERMI #healthpractitioner

 

, , , ,

Author of all content is Lucinda Curran, unless otherwise indicated.